Panel White, White Covering 2.5 l

WOCA Panel White Covering is a special matt coating used for yellowed woodwork, wooden boards, for ceilings and walls and ceiling panels of oak.

- For all wood types and types of wood panels
- Used for untreated or previously lacquered surfaces. Used for yellowed woodwork, wood panels for ceilings and walls and ceiling panels made from oak.
- Reduces penetration of knots
- Used for both basic and end treatment and is very easily applicable
- Water-based special coating

Range: Approx. 8-10 m2/litres
Colour: White
Drying time (at 20 degrees): Approx. 24 hours
Tool: For application use a suitable wide brush or paint roller. Suitable for a paint sprayer.

User Guide

1 Make sure that the wood is clean, dry and pre-cleaned. Wash with WOCA Wood cleaner mixed with water in a ratio of 1:40. Wipe off with clean water. Previously lacquered surfaces are cleaned/smoothed. A test treatment in a small, inconspicuous place to evaluate the result is recommended.

2 Panel white should be thoroughly stirred before and during use. Buckets with various batch numbers (production number) are mixed in order to avoid nuance- and shine variations.

3 The product is applied with a brush in an even coating. Always apply the coating along the grain at approx.an arm's length. It is recommended to finish 3-4 boards at a time to avoid visible overlaps.

4 Tools are cleaned in water and soap.

The treated wood surface can be cleaned with Wood Cleaner mixed with water in a ratio of 1:40. Using a wrung out cloth is recommended.